A good maintenance technician finds the cause of a fault rather than the quickest patch, works safely around electricity and water, and writes down what they did. To hire one, advertise the trades you really need, ask six questions about real call-outs, and give a 15-minute hands-on fault test with your own equipment.
One technician or several trades?
In the Gulf, a "maintenance technician" for a small building, hotel, school or chain of shops is usually a generalist who covers AC basics, plumbing, light electrical work, carpentry and painting. Big jobs go to specialist contractors. Decide where your line is before you write the advert.
| Work | In-house technician | Specialist contractor |
|---|---|---|
| AC filter cleaning, thermostat checks, minor leaks | Usually yes | |
| Gas refilling, compressor replacement | Usually yes | |
| Taps, toilets, blocked drains | Yes | Major pipework |
| Changing lights, sockets, small electrical faults | Within the rules for your emirate | Distribution boards, new circuits |
| Doors, locks, shelves, painting | Yes |
Check the current rules for your emirate on which electrical, gas and AC work needs a licensed contractor.
What the job is
Daily call-outs from tenants, staff or guests; a planned maintenance list (filters, pumps, fire-safety checks with the contractor); keeping spare parts in stock; meeting contractors and checking their work; and a log of every job.
A job advert you can copy
Title: Maintenance Technician, [company or building], [area, emirate]
What you will do
- Respond to maintenance requests and fix faults in AC, plumbing, light electrical and fittings.
- Carry out the planned maintenance schedule and record each task.
- Keep a stock of common spare parts and tell us before they run out.
- Supervise and check the work of outside contractors.
- Work safely, follow the permit and isolation rules, and log every job.
What you need
- Must have: experience as a maintenance or MEP technician in buildings, hotels or similar.
- Must have: hands-on skill in at least two of AC, plumbing and electrical work.
- Must have: safe working habits with electricity, water and ladders.
- Nice to have: a trade certificate or technical diploma.
- Nice to have: a driving licence, if you'll move between sites.
Hours: [shifts; say if there's an on-call rota] Location: [site or sites] Pay: [your range, and on-call pay if any]. Check current pay for this role in your emirate. How to apply: send your CV through the apply link. We reply to everyone.
Ask for trades and safety habits. Never age, gender, nationality or religion. Physical requirements must be about the job ("able to work at height with a ladder"), not about a type of person.
The 15-minute fault test
Set up three stations in a workshop or plant room. Have your own qualified electrician prepare the electrical station and isolate its supply beforehand; nobody works on a live circuit in a test.
- The tap (5 minutes). A dripping mixer tap with a worn cartridge. Watch: water off first, the right tool, checks the fix.
- The light (5 minutes). A light fitting on a test board that doesn't work because of a loose connection or a failed lamp. Ask them to show, step by step, how they would isolate the supply and prove it dead before touching anything. If they reach for the fitting first, stop the test.
- The AC (5 minutes). An indoor unit with a blocked filter and a thermostat on the wrong mode. Watch: checks the simple things first.
Ask them to write a two-line log entry for each. You're watching for safety, order of diagnosis and record-keeping, in that order.
Six interview questions
- "A tenant says the AC isn't cooling. What do you check, in order?" Good: thermostat, filter, outdoor unit running, drain line, then calls the contractor if it's gas or the compressor.
- "How do you make sure a circuit is safe before you work on it?" Good: isolate, lock off or tag, test it's dead with a tester. Specific.
- "The same toilet blocks every month." Good: looks for the cause (pipe slope, what goes in it), logs it, suggests a fix.
- "A contractor finishes a job. How do you check it?" Good: tests it working, checks the area is clean, signs only when it is.
- "You're called to two urgent jobs at once." Good: safety first (water leak near electrics), then the rest; tells both callers.
- "Tell me about a fault you couldn't fix." Good: honest; says who they called and what they learned.
Three common mistakes
- No safety question. Ask the isolation question to every candidate.
- Hiring a trade you don't need. A strong electrician who has never touched plumbing may struggle in a building where most calls are leaks.
- No log. Without written records you'll pay for the same repair repeatedly.
The first week
- Day 1: site walk, plant rooms, isolation points, emergency contacts.
- Day 2: the planned maintenance schedule; the spare parts store.
- Day 3: call-outs with a colleague or the manager.
- Day 4: meet the main contractors.
- Day 5: review their log; agree on-call rules if any.
Where Jobrov fits
On Jobrov you paste this advert to get a draft, publish it and share its one apply link in your own channels; applicants come from that link. Each one is ranked with the CV lines that meet each requirement quoted, and you propose interview times that candidates book with a calendar invite. Jobrov has no screening questions, so list each trade as a must-have. It never filters by age, gender, religion or nationality (fair hiring). See Jobrov vs reading CVs by hand. Plans start at AED 149 a month, and any plan is free for 30 days with no card (pricing). First employee? Start with the first hire checklist; check past work with the reference check questions.
When this is not for you
If you have a few units and call-outs once a fortnight, an annual maintenance contract may cost less than a salary.